Transcend JetRAM - DDR2 - module - 1 GB - SO-DIMM 200-pin - 667 MHz / PC2-5300 - unbuffered
SKU JM667QSU-1G
Produktbeskrivelse: | Transcend JetRAM - DDR2 - modul - 1 GB - SO DIMM 200-PIN - 667 MHz / PC2-5300 - ikke bufferet |
Produkttype: | Hukommelsesmodul |
Kapacitet: | 1 GB |
Hukommelsestype: | DDR2 SDRAM - SO DIMM 200-PIN |
Opgraderingstype: | Generisk |
Dataintegritetskontrol: | Ikke-ECC |
Hastighed: | 667 MHz (PC2-5300) |
- Specifikationer
- Beskrivelse
Generelt | |
Kapacitet: | 1 GB |
Opgraderingstype: | Generisk |
Hukommelse | |
Type: | DRAM hukommelsesmodul |
Teknologi: | DDR2 SDRAM |
Model: | SO DIMM 200-PIN |
Hastighed: | 667 MHz (PC2-5300) |
Søgetids Timinger: | CL5 |
Dataintegritetskontrol: | Ikke-ECC |
Egenskaber: | On-Die Termination (ODT), Off-Chip Driver (OCD), ikke bufferet |
Modulkonfiguration: | 128 x 64 |
Organisering af chips: | 128 x 8 |
Spænding: | 1.8 V |
Diverse | |
Overensstemmelsesstandarder: | RoHS |
Producentgaranti | |
Service & Support: | Begrænset livtidsgaranti |
Oplysninger om kompatibilitet | |
Designet for: | ASUS Eee PC 4G Surf, 900 ¦ ASUS U3S |
The JM667QSU-1G is a 128M x 64bits DDR2-667 SO-DIMM. The JM667QSU-1G consists of 8pcs 128M x 8 bits DDR2 SDRAMs in 60 ball FBGA packages and a 2048 bits serial EEPROM on a 200-pin printed circuit board. The JM667QSU-1G is a dual in-line memory module and is intended for mounting into 200-pin edge connector sockets.
Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
- RoHS compliant products
- JEDEC standard 1.8V ± 0.1V power supply
- Posted CAS
- Programmable sequential / interleave burst mode
- Bi-directional differential data-strobe
- Off-Chip Driver (OCD) impedance adjustment
- MRS cycle with address key programs
- On die termination
- Serial presence detect with EEPROM
De tekniske detaljer kommer fra 3. part. edgemo tager forbehold for fejl.