StarTech.com HDBaseT over CAT5e / CAT6 HDMI Receiver for ST424HDBT - 230ft (70m) - 1080p (STHDBTRX) - video/audio/infrared extender

SKU STHDBTRX
Produktbeskrivelse:StarTech.com HDBaseT over CAT5e / CAT6 HDMI Receiver for ST424HDBT - 230ft (70m) - 1080p (STHDBTRX) - video/audio/infrarød forlænger
Enhedstype:Video/audio/infrarød forlænger (modtager)
Model:Ekstern
Lokalisering:Australien, Nordamerika, United Kingdom, Europa
Transmissionsmedie:CAT 5e/6
Maks. overføringsafstand:70 m
Effekt:AC 120/230 V
Ikke på lager
  • Specifikationer
  • Beskrivelse
Generelt
Enhedstype:Video/audio/infrarød forlænger (modtager)
Model:Ekstern
Farve:Sort
Lokalisering:Australien, Nordamerika, United Kingdom, Europa
Netværk
Forbindelsesteknologi:Kabling
Maksimum opløsning:1920 x 1200 / 1080p
Maks. overføringsafstand:70 m
Statusindikatorer:Portstatus
Ekspansion / Konnektivitet
Interface:1 x HDMI ¦ 1 x IrDA ¦ 1 x netværk - RJ-45
Diverse
Overensstemmelsesstandarder:FCC, RoHS
Effekt
Strømenhed:Ekstern strømforsyning
Antal installeret:1
Maks. antal understøttet:1
Nødvendig spænding:AC 120/230 V
Mål og vægt
Bredde:11 cm
Dybde:7.5 cm
Højde:2.35 cm
Producentgaranti
Service & Support:Begrænset garanti - 2 år
Miljømæssige parametre
Min. driftstemperatur:-5 °C
Maks. driftstemperatur:35 °C
Fugtighedsgrad ved brug:5 - 90%
Oplysninger om kompatibilitet
Designet for:P/N: ST424HDBT, SVA5M3NEUA
vis mere
Extend the HDMI signal from your ST424HDBT Matrix switch over Cat5/Cat6 cable, with IR control. This HDBaseT receiver works with the ST424HDBT HDMI matrix switch to extend an HDMI audio/video source up to 230ft (70m) over Cat5e/6 cabling. One STHDBTRX receiver unit is required for each individual remote display.
Together with the ST424HDBT, the CAT5 HDMI receiver works to create a digital signage solution that eliminates the expense and hassle of running multiple devices with an HDMI matrix switch and extender in one clutter-free system. Because the signal is extended using standard Cat5e/6 Ethernet cables with RJ45 connectors, you can use your existing cabling infrastructure, without the additional cost of special cabling or connectors.
For remote source operation, the HDMI receiver can also extend an Infrared signal from a remote control to operate either the display or the video source from either side or system, using the included IR extender and receiver cables.




De tekniske detaljer kommer fra 3. part. edgemo tager forbehold for fejl.