StarTech.com 2.5 to 3.5 Hard Drive Adapter - For SATA and SAS SSDs/HDDs - SSD Enclosure - HDD Enclosure - Internal Hard Drive Enclosure (25SATSAS35HD) - storage enclosure - SATA 6Gb/s / SAS 6Gb/s - SAS 6Gb/s, SATA 6Gb/s
SKU 25SATSAS35HD
Produktbeskrivelse: | StarTech.com 2.5 to 3.5 Hard Drive Adapter - For SATA and SAS SSDs/HDDs - SSD Enclosure - HDD Enclosure - Internal Hard Drive Enclosure (25SATSAS35HD) - lagringspakning - SATA 6Gb/s / SAS 6Gb/s - SAS 6Gb/s, SATA 6Gb/s |
Enhedstype: | Lagringspakning - intern |
Bustype: | SAS 6Gb/s, SATA 6Gb/s |
Farve: | Sort, sølv |
Udvidelses-båse: | 1 x intern - 2.5" x 1/8H |
Kompatibel bås: | 1 3.5" x 1/3H |
Harddiskens formfaktorkompatibilitet: | 2.5" |
- Specifikationer
- Beskrivelse
Generelt | |
Enhedstype: | Lagringspakning - intern |
Harddiskens formfaktorkompatibilitet: | 2.5" |
Maksimal højde for harddisk: | 15 mm |
Host Bus: | SAS 6Gb/s, SATA 6Gb/s |
Produktmateriale: | Plastik, aluminium |
Farve: | Sort, sølv |
Understøttet grænseflade: | SATA-600 / SAS 2.0 |
Controller for lagring | |
Interface: | SATA 6Gb/s / SAS 6Gb/s |
Dataoverførselshastighed: | 6 Gbit/s |
Understøttede enheder: | Harddisk, solid state drev |
Ekspansion / Konnektivitet | |
Båse: | 1 x intern - 2.5" x 1/8H |
Interface: | 1 x SATA 6Gb/s |
Tilslutninger: | 1 - 22 pin Serial ATA |
Kompatibel bås: | 1 x intern 3.5" x 1/3H |
Diverse | |
Egenskaber: | Hot-swappable (kan udskiftes hurtigt), S.M.A.R.T. support, TRIM-support, 4Kn drev kompatibel |
Monteringspakke: | Inkluderet |
Overensstemmelsesstandarder: | FCC, RoHS, WEEE |
Producentgaranti | |
Service & Support: | Begrænset garanti - 2 år |
Mål og vægt | |
Bredde: | 10.1 cm |
Dybde: | 14.6 cm |
Højde: | 2.6 cm |
Vægt: | 252 g |
Mål & vægt (forsendelse) | |
Vægt ved forsendelse: | 252 g |
Miljømæssige parametre | |
Min. driftstemperatur: | 0 °C |
Maks. driftstemperatur: | 55 °C |
Fugtighedsgrad ved brug: | 5 - 65% |
Turn almost any 2.5" SATA/SAS drive into a 3.5" drive. This 2.5" to 3.5" hard drive adapter lets you install a 2.5" SATA or SAS hard drive (HDD) or solid-state drive (SSD) into an internal or external 3.5" drive bay, using standard drive-mounting holes.
The 2.5" to 3.5" hard drive bay adapter lets you install a newer, higher performance drive such as an SSD into a legacy system that may only support a 3.5" hard drive. It provides a cost-efficient way to enhance storage performance and reliability without expensive upgrades to core IT systems. It's also ideal for system administrators who want to build a system that takes advantage of the increased performance of a 2.5" HDD/SSD.
To utilize the full speed potential of your SATA/SAS drive, the adapter supports transfer speeds up to 6Gbps.
You can install the adapter into a desktop, server, storage-array, hot-swap bay, and drive drawer. It offers permanent installation in a 3.5" drive bay with standard mounting holes. When the adapter is installed, you simply slide a 2.5" HDD/SSD into the adapter enclosure, with no tools required.
The adapter is suitable for drives with a height of up to 15 mm. Virtually any 2.5" SATA/SAS drive can be made to look and function like a 3.5" drive.
The adapter includes a label you can use to track and record information about the installed drive.
The 2.5" to 3.5" hard drive bay adapter lets you install a newer, higher performance drive such as an SSD into a legacy system that may only support a 3.5" hard drive. It provides a cost-efficient way to enhance storage performance and reliability without expensive upgrades to core IT systems. It's also ideal for system administrators who want to build a system that takes advantage of the increased performance of a 2.5" HDD/SSD.
To utilize the full speed potential of your SATA/SAS drive, the adapter supports transfer speeds up to 6Gbps.
You can install the adapter into a desktop, server, storage-array, hot-swap bay, and drive drawer. It offers permanent installation in a 3.5" drive bay with standard mounting holes. When the adapter is installed, you simply slide a 2.5" HDD/SSD into the adapter enclosure, with no tools required.
The adapter is suitable for drives with a height of up to 15 mm. Virtually any 2.5" SATA/SAS drive can be made to look and function like a 3.5" drive.
The adapter includes a label you can use to track and record information about the installed drive.
De tekniske detaljer kommer fra 3. part. edgemo tager forbehold for fejl.