Datamax DMXNet III - print server - 10/100 Ethernet

SKU OPT78-2829-02
Produktbeskrivelse:Datamax DMXNet III - udskriftsserver - 10/100 Ethernet
Enhedstype:Udskriftsserver
Model:Indstiksmodul
Porte:10/100 Ethernet
Kabeltype:Ethernet 10Base-T, Ethernet 100Base-TX
Dataforbindelsesprotokol:10Mb LAN, 100Mb LAN, 802.11b/g
Netværks/overføselsprotokol:TCP/IP, UDP/IP, LPR/LPD, ARP, FTP, BOOTP, RARP
Ikke på lager
  • Specifikationer
  • Beskrivelse
Generelt
Enhedstype:Udskriftsserver
Model:Indstiksmodul
Netværk
Porte:10/100 Ethernet
Forbindelsesteknologi:Trådløs, kabling
Kabeltype:Ethernet 10Base-T, Ethernet 100Base-TX
Dataforbindelsesprotokol:Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
Netværks/overføselsprotokol:TCP/IP, UDP/IP, LPR/LPD, ARP, FTP, BOOTP, RARP
Protokol til fjernadministration:SNMP, Telnet, HTTP
Frekvensbånd:2.4 GHz
Egenskaber:DHCP-understøttelse, auto-negotiation, halv dupleksmodus, fuld dupleksmodus, webserver
Ekspansion / Konnektivitet
Interface:1 x 100Base-TX - RJ-45
Diverse
Krypterings algoritme:LEAP, 128-bit WEP, 64-bit WEP, TLS, PEAP, TTLS, WPA, WPA2
Miljømæssige parametre
Min. driftstemperatur:-40 °C
Maks. driftstemperatur:85 °C
Oplysninger om kompatibilitet
Designet for:Datamax M-Class Mark II M-4210, M-4308
vis mere
DMXNet is a high-performance network interface card for the Datamax I-Class, A-Class, and WClass Printer families. Driven by a powerful 32-bit RISC NET+ARM processor, the DMXNet card is easily installed and configured within seconds from the front panel or remotely via any standard Web browser to bring the levels of product maintenance and support through enhanced monitoring and control.
The DMXNet card supports basic IPX (Novell) and IP protocols over various Ethernet frame types. All protocols may be enabled and are supported concurrently. Multiple management connections, including network services APIs where provided, may be active at the same time. NetWare is operable in Network Directory Services and in Novell bindery or bindery emulation modes. IPX/SPX is used to support printer status requests so that the NIC is compatible with both Novell Pconsole and Net Admin utilities. The NIC includes an SNMP agent operating over IPX.
The NIC includes an SNMP V1 agent and implements the RFC1213 groups of MIB II as well as Host Resource MIB, the Printer MIB, and a DMX Enterprise Private MIB. The NIC MIB and Private MIB provide access to essentially the same NIC setup and Printer setup parameters as the web pages. The NIC supports one basic trap destination IP address for general trap messages. Current traps include general printer fault, head up, paper out, and ribbon out.
  • Internet printing protocol
  • Embedded web server
  • Remote printer management
  • DMX configuration utility




De tekniske detaljer kommer fra 3. part. edgemo tager forbehold for fejl.