HPE - power supply - redundant - 650 Watt
SKU JD183A#ABB
Produktbeskrivelse: | HPE - strømforsyning - redundant - 650 Watt |
Enhedstype: | Strømforsyning - redundant - ekstern |
Vægt: | 3.8 kg |
Lokalisering: | Engelsk / Europa |
Indgangspænding: | AC 110/220 V |
Strømkapacitet: | 650 Watt |
Dimensioner (B x D x H): | 44.1 cm x 18.2 cm x 4.4 cm |
- Specifikationer
- Beskrivelse
Generelt | |
Enhedstype: | Strømforsyning - redundant - ekstern |
Lokalisering: | Engelsk / Europa |
Strømenhed | |
Indgangspænding: | AC 110/220 V |
Nødvendig frekvens: | 50/60 Hz |
Strømkapacitet: | 650 Watt |
Mål og vægt | |
Bredde: | 44.1 cm |
Dybde: | 18.2 cm |
Højde: | 4.4 cm |
Vægt: | 3.8 kg |
Oplysninger om kompatibilitet | |
Designet for: | HP 3100-8-PoE v2 EI Switch ¦ HPE 3600-24 v2 EI, 3600-24 v2 SI Switch, 3600-24-PoE+ v2 EI, 3600-24-PoE+ v2 SI, 3600-24-SFP v2 EI, 3600-48 v2 EI, 3600-48 v2 SI, 3600-48-PoE+ v2 EI, 3600-48-PoE+ v2 SI, 5120-24G EI Switch, 5120-24G EI Switch with 2 Interface Slots, 5120-24G-PoE+ EI Switch with 2 Interface Slots, 5120-48G EI Switch, 5120-48G EI Switch with 2 Interface Slots, 5120-48G-PoE+ EI Switch with 2 Interface Slots, 5130-48G-4SFP+ EI, 5500-24G EI Switch, 5500-24G EI Switch with 2 Interface Slots, 5500-24G EI TAA-compliant Switch with 2 Interface Slots, 5500-48G EI Switch, 5500-48G EI Switch with 2 Interface Slots, 5800-24G Switch, 5800-48G Switch, MSR3012, MSR30-16 POE, MSR30-20, MSR30-20 DC, MSR3024, MSR30-40, MSR30-40 DC, MSR30-40 POE, MSR30-60 DC, MSR30-60 POE ¦ HPE FlexNetwork 5130 48G 4SFP+ EI Brazil, 5130-48G-2SFP+-2XGT EI, 7502 ¦ HPE OfficeConnect 1950 12XGT 4SFP+ |
The H3C RPS 800-A redundant power system is an external DC power supply unit that uses AC input and provides DC output for switch redundant backup power. This redundant power system (RPS) provides selective DC outputs. Depending on the connected DC output cable(s), the RPS can provide +12 V DC, -54 V DC, or +12 V DC and -54 V DC concurrently to the powered device. The RPS 800 supports cold backup of power supply, which means it only switches to the DC output state when it detects a power supply failure of the powered device.
De tekniske detaljer kommer fra 3. part. edgemo tager forbehold for fejl.